Summer Starts Here - Save up to 70%
Tekonsha T-One Vehicle Wiring Harness Installation - 2011 Nissan Juke- Video
Hi, there Juke owners, today in our 2011 Nissan Juke, we're going to be taking a look at and showing you how to install the Tekonsha's T1 Vehicle Wiring Harness with four-pole flat trailer connector. And this is what our wiring will look like when it's installed. You really don't even see anything. It's hidden behind our cover here on our driver's side, you can see our module harness and all the wiring is located behind the panels. It's extremely easy to get back here to it, which is nice. So if you ever need to, you can just pop this cover off and access it. more
10/2/2019 11:24:31 AM
Curt T-Connector Vehicle Wiring Harness Installation - 2013 Nissan Juke- Video
Today on our 2013 Nissan Juke we'll be installing the CURT custom fit vehicle wiring harness, part number C56124. Now to begin our install we'll first go ahead and open up the rear hatch and then remove the spare tire cover. Next we'll remove the foam compartment next to the spare tire on the driver side. With that out of the way we'll go ahead and remove the rear threshold. To remove the rear threshold we'll get underneath it with a flat blade screwdriver or an interior trim panel tool to release the fasteners underneath. Once we've removed the threshold we'll set it aside. next we'll go ahead and remove the spare tire. more
1/16/2015 3:18:36 PM
Filter Videos
Filter Videos
